ionic impurity in a host material which acts as a luminescing centre, also called dopant.
general emission of light after a source of excitation energy is removed, usually by phosphorescence.
a material which converts low energy light to high energy light by photoluminescence. Also called up-converter.
unit of luminous intensity.
multiple absorption/emission cycles in a material where the emission from one cycle is matched to the absorption of the next.
luminescence where the initial energy comes from fast moving electron bombardment, such as on a television screen or computer monitor.
excitation of a phosphorescent material, usually by incident light.
luminescence where the initial energy comes from chemical reactions, such as phosphorous burning in oxygen.
Correlated colour temperature
the colour of white light sources, the temperature of the black body radiator which produces the chromaticity most similar to the light source. Unit: °K.
Daylight fluorescence (DF)
fluorescence where the emission is in the visible spectrum.
DIN67510 Part 1
specification describing afterglow performance in a standard way, in the form a/b – c – d – e, where a is afterglow brightness in mcd/m2 after ten minutes, b is afterglow brightness after sixty minutes, c is the decay period in minutes to 0.3 mcd/m2, d is excitation colour code, e is emission colour code. Parts 2 and 3 refer to in situ testing of photoluminescent items.
ionic activator commonly used in inorganic phosphors.
condition of a charged phosphor before emission.
luminescence where the initial energy comes from electric fields, usually alternating.
a substance exhibiting fluorescence.
very fast absorption and emission of photons where there is no appreciable afterglow. No electron spin inversion is involved.
luminous intensity, usually of a light source, per unit solid angle; Unit: lumen.
Illuminant A, B, C
incandescent illumination in the range 380nm to 770nm, respectively 2856K (yellow), 4874K (mean noon sunlight) and 6774K (average daylight, blue).
daylight illuminants defined from 300-830nm, designated with a two digit subscript to describe Correlated Colour Temperature, e.g. D65 indicates 6500K, close to Illuminant C.
luminous flux, usually of incident light. Units: lux or lumens per square metre.
part of the electromagnet spectrum immediately less energetic than visible light, ranging from around 700 nanometres to 10 microns wavelength.
transfer from one molecular angular momentum state to another by electron spin inversion. Principal of physical phosphorescence.
quantum efficiency multiplied by amount of absorbed radiation.
unit of light flux. One lumen equals the flux emitted into a solid angle of one steradian by a point source of one candela.
brightness, usually of a surface, i.e. luminous intensity per unit area. unit: candelas per square metre, usually expressed in millicandelas per square metre.
emission of light from a substance unaccompanied by heat.
Luminous directional reflectance
reflectance of a surface in given directions of illumination and view. The ratio of the brightness of a surface to the brightness that an ideally diffusing, perfectly white surface would have if illuminated in the same way. Units: none.
a fundamental unit derived from black body radiation at set conditions in a given direction. Unit: candela.
Luminous efficiency (L)
luminous flux emitted by a source, per unit of power consumed. Unit: lumens per Watt.
unit of illuminance, lumens per square metre. In imperial units, one footcandle is approximately 10 lux.
a) luminescent, b) able to change the polarity of incident light during reflection.
a substance exhibiting the property of phosphorescence.
slower absorption and emission of photons where afterglow is usually apparent, involving electron spin inversion allowing absorbed energy to be trapped for a period before being released as photons.
luminescence where the energy comes from incident light. Includes fluorescent and phosphorescent processes.
Quantum yield (q)
ratio of energy emitted by a luminescent substance to that absorbed, expressed as a percentage or decimal part of unity. Units: none.
the loss of luminescent emissions to absorbing centres, or the addition of an agent to do this. Also called killing.
ratio of emitted luminescent power to power absorbed from exciting radiation.
luminescence where the initial energy comes from radioactive decay, e.g. as with tritium. Products relying on RL are also called self emitters.
fast fluorescence with no internal loss of energy.
charging of a phosphorescent material to maximum.
photoluminescent material with absorption at very low wavelengths, i.e. gamma or X rays.
difference in wavelength peaks between absorption and emission curves in photoluminescent materials, positive where wavelength increases, negative where wavelength decreases. Unit: nanometres.
luminescence where heat energy triggers emission of photons from internal energy previously stored.
short lived luminescence caused by the violent breaking of chemical bonds, often associated with frictional forces.
part of the electromagnet spectrum immediately more energetic than visible light, ranging from approx. 100 nanometres (VUV) to 400 nanometres (UVA) wavelength.
photoluminescent process converting lower energy